These Screw presses are designed to serve Forging, Coining and sizing operation in steel and nonferrous metals subject to tools offering adequate impact surfaces. These Presses are ideal high precision forging machines. However, these machines differ in certain respects to suit the additional requirements which have to be satisfied for die forging i.e. greater blow energy, longer ram guides by securing the nut in the ram optimized, reliable and maintenance free connection has been achieved due to the similarity in function of a screw press fully adopted to the requirement of die forging, and a modern die forging hammer this machine offer the logical solution in those cases where a die forging hammer must not or can not be used for a number of different reasons exactly in the same way as on a die forging hammer or a hydraulic press. The bottom reversing point of the ram is variable and the machine can not therefore, jam subject to adequately dimensioned impact surfaces on the die holder. It is therefore, possible to produce Extremely uniform forgings. An ejector is provided at lower part of table.

TECHNICAL SPECIFICATION

In view of continuously development, we reserve the right to modify the design and or dimensions without notice.

FEATURES AND ADVANTAGES

• High useful working energy.
• Mechanical energy store.
• Overload protection by slipping wheel.
• Thermally stable ram guide ways with wear-proof guide gibs.
• High forging precision.
• No need to readjust ram with machine warming up.
• No jamming under load possible.
• Long Die life because of short Pressure-Contact Times.
• Sequence of different strokes on one work piece possible.
• Totally closed die forging capability.